Cubicin 350 mg powder for solution for injection and for infusion

Package leaflet: Information for the user

Introduction

Package leaflet: information for the patient

Cubicin 350mg powder for injectable and infusion solution

daptomycin

Read all of this leaflet carefully before you start using this medicine because it contains important information for you.

• Keep this leaflet. You may need to read it again.
• If you have any questions, ask your doctor or nurse.
• This medicine has been prescribed for you only. Do not pass it on to other people, even if they have the same symptoms as you, because it may harm them.
• If you experience any adverse effects, consult your doctor or nurse, even if they are adverse effects not listed in this leaflet. See section 4.

Contents of this leaflet

1. What Cubicin is and what it is used for
2. What you need to know before receiving Cubicin
3. How Cubicin is administered
4. Possible adverse effects
5. Storage of Cubicin
6. Contents of the pack and other information

1. What Cubicin is and what it is used for

The active substance in Cubicin powder for injectable solution and for infusion is daptomycin. Daptomycin is an antibacterial agent capable of stopping the growth of certain bacteria. Cubicin is used in adults and in children and adolescents (aged 1 to 17 years) to treat skin and soft tissue infections. It is also used to treat bloodstream infections when associated with a skin infection.

Cubicin is also used in adults to treat infections of the tissues lining the inside of the heart (including the heart valves), caused by a type of bacteria called Staphylococcus aureus. It is also used to treat bloodstream infections caused by the same type of bacteria when associated with a heart infection.

Depending on the type of infection(s) you have, your doctor may also prescribe other antibacterial agents while you are receiving treatment with Cubicin.

2. What you need to know before receiving Cubicin

Do not receive Cubicin

If you are allergic to daptomycin or sodium hydroxide or to any of the other ingredients of this medicine (listed in section 6).

If this applies to you, inform your doctor or nurse. If you think you may be allergic, consult your doctor or nurse.

Warnings and precautions

Talk to your doctor or nurse before receiving Cubicin:

• If you have or have previously had kidney problems. Your doctor may need to adjust the dose of Cubicin (see section 3 of this leaflet).
• Occasionally, patients receiving Cubicin may develop increased muscle sensitivity, pain, or weakness (see section 4 of this leaflet for more information). Inform your doctor if this occurs. Your doctor will ensure that you have a blood test and will advise whether or not you should continue using Cubicin. Symptoms usually resolve within a few days after stopping treatment with Cubicin.
• If you have ever had, after taking daptomycin, a severe skin rash or skin peeling, blisters and/or mouth sores, or serious kidney problems.
• If you have significant overweight, there is a possibility that your blood levels of Cubicin may be higher than those found in individuals of average weight, and therefore you may require closer monitoring for adverse effects.

If any of the above situations apply to you, inform your doctor or nurse before receiving Cubicin.

Immediately inform your doctor or nurse if you develop any of the following symptoms:

• Severe and serious allergic reactions have been observed in patients treated with almost all antibacterial agents, including Cubicin. Symptoms may include wheezing, difficulty breathing, swelling of the face, neck, and throat, skin rash and hives, or fever.

• Serious skin diseases have been reported with the use of Cubicin. Symptoms occurring with these skin conditions may include:

• onset or worsening of fever,

• raised or fluid-filled red spots on the skin, which may start in the armpits or on the chest or groin areas and may spread over a large area of the body,

• blisters or sores in the mouth or genitals.

• Serious kidney problems have been reported with the use of Cubicin. Symptoms may include fever and rash.

• Any tingling or numbness in the hands or feet, loss of sensation, or unusual movement difficulties. If this occurs, inform your doctor, who will decide whether treatment should continue.

• Diarrhea, especially if you notice blood or mucus in the stool or if the diarrhea becomes severe or prolonged.

• Onset or worsening of fever, cough, or difficulty breathing. These may be signs of a rare but serious lung condition called eosinophilic pneumonia. Your doctor will check your lung function and decide whether or not to continue treatment with Cubicin.

Cubicin may interfere with laboratory tests measuring your blood's clotting ability. Results may falsely suggest impaired clotting, even though no actual problem exists. Therefore, it is important that your doctor is aware that you are receiving Cubicin. Inform your doctor that you are being treated with Cubicin.

Your doctor will perform blood tests to monitor your muscle health before starting treatment and regularly during treatment with Cubicin.

Children and adolescents

Cubicin must not be given to children under one year of age, as animal studies have shown that this age group may experience severe adverse effects.

Use in elderly patients

Patients over 65 years of age may receive the same dose as other adults, provided their kidneys are functioning properly.

Other medicines and Cubicin

Tell your doctor or nurse if you are taking, have recently taken, or might need to take any other medicines.

It is particularly important that you mention the following:

• Medications called statins or fibrates (used to lower cholesterol) or cyclosporine (a medicine used in organ transplantation to prevent organ rejection or for other conditions, e.g., rheumatoid arthritis or atopic dermatitis). The risk of muscle-related adverse effects may increase if you take any of these medicines (and others that may affect muscles) during treatment with Cubicin. Your doctor may decide not to administer Cubicin or to temporarily interrupt treatment with the other medicine.
• Pain-relieving medicines called non-steroidal anti-inflammatory drugs (NSAIDs) or COX-2 inhibitors (e.g., celecoxib). These may interfere with the kidney elimination of Cubicin.
• Oral anticoagulants (e.g., warfarin), which are medicines that prevent blood clotting. Your doctor may need to monitor your blood clotting times.

Pregnancy and breastfeeding

Cubicin is generally not given to pregnant women. If you are pregnant or breastfeeding, think you may be pregnant, or plan to become pregnant, consult your doctor or pharmacist before using this medicine.

You must not breastfeed while receiving Cubicin, as it may pass into breast milk and harm the baby.

Driving and using machines

Cubicin has no known effects on the ability to drive or use machines.

Cubicin contains sodium

This medicine contains less than 1 mmol of sodium (23 mg) per dose; that is, essentially “sodium-free”.

3. How Cubicin is administered

Cubicin will normally be administered to you by your doctor or nurse.

Adults (18 years of age and older)

The dose will depend on your body weight and the type of infection being treated. The usual dose for adults is 4 mg per kg of body weight once daily for skin infections, or 6 mg per kg of body weight once daily for heart infections or bloodstream infections associated with skin or heart infections. In adult patients, this dose is administered directly into the bloodstream (into a vein), either as an infusion lasting approximately 30 minutes or as an injection lasting approximately 2 minutes. The same dose is recommended for patients over 65 years of age, provided their kidneys are functioning properly.

If your kidneys are not functioning well, you may receive Cubicin less frequently, e.g., once every other day. If you are undergoing dialysis and your next dose of Cubicin is due on a dialysis day, you will usually receive Cubicin after the dialysis session.

Children and adolescents (1 to 17 years of age)

The recommended doses in children and adolescents (1 to 17 years of age) depend on the patient's age and the type of infection being treated. This dose is administered directly into the bloodstream (into a vein) as an infusion lasting approximately 30–60 minutes.

A full course of treatment for skin infections usually lasts between 1 and 2 weeks. Your doctor will decide the duration of your treatment for bloodstream or heart infections, as well as for skin infections.

Detailed instructions for use and handling are provided at the end of the leaflet.

4. Possible adverse effects

Like all medicines, this medicine can cause adverse effects, although not everyone experiences them.

The most serious adverse effects are described below:

Serious adverse effects with unknown frequency (cannot be estimated from available data)

• Cases of hypersensitivity reactions (serious allergic reactions including anaphylaxis and angioedema) have been reported during administration of Cubicin. These serious allergic reactions require immediate medical attention. Inform your doctor or nurse immediately if you experience any of the following symptoms:

• Chest pain or pressure,

• Rash or hives,

• Swelling around the throat,

• Rapid or weak pulse,

• Wheezing,

• Fever,

• Chills or shivering,

• Flushing,

• Dizziness,

• Fainting,

• Metallic taste.

• Contact your doctor immediately if you experience muscle pain, increased muscle tenderness, or muscle weakness of unknown origin. Muscle problems can be serious, including muscle breakdown (rhabdomyolysis), which may lead to kidney damage.

Other adverse effects reported with the use of Cubicin include:

• A rare but potentially serious lung disorder called eosinophilic pneumonia, mostly occurring after more than 2 weeks of treatment. Symptoms may include difficulty breathing, new or worsening cough, or new or worsening fever.

• Serious skin disorders. Symptoms may include:

• New or worsening fever,

• Raised red spots or fluid-filled blisters on the skin, which may start in the armpits or on areas of the chest or groin and may spread over a large area of the body,

• Blisters or sores in the mouth or genital area.

• A serious kidney problem. Symptoms may include fever and rash.

If you experience any of these symptoms, inform your doctor or nurse immediately. Your doctor will carry out additional tests to establish a diagnosis.

The most commonly reported adverse effects are listed below:

Frequent adverse effects (may affect up to 1 in 10 patients)

• Fungal infections, such as thrush (mouth ulcers),
• Urinary tract infection,
• Decreased number of red blood cells (anaemia),
• Dizziness, anxiety, difficulty sleeping,
• Headache,
• Fever, weakness (asthenia),
• High or low blood pressure,
• Constipation, abdominal pain,
• Diarrhoea, discomfort (nausea or vomiting),
• Flatulence,
• Abdominal swelling or distension,
• Skin rash or itching,
• Pain, itching or redness at the infusion site,
• Pain in arms or legs,
• Increased levels of liver enzymes or creatine phosphokinase (CPK) in blood tests.

The following are other adverse effects that may occur after treatment with Cubicin:

Uncommon adverse effects (may affect up to 1 in 100 patients)

• Blood disorders (e.g. increased number of platelets, which may increase the tendency to develop blood clots, or increased number of certain types of white blood cells),
• Loss of appetite,
• Tingling or numbness in hands or feet, disturbances in taste sensation,
• Tremors,
• Changes in heart rhythm, hot flushes,
• Indigestion (dyspepsia), inflammation of the tongue,
• Itchy rash,
• Muscle pain, cramps or weakness, muscle inflammation (myositis), joint pain,
• Kidney problems,
• Inflammation and irritation of the vagina,
• Generalised pain or weakness, tiredness (fatigue),
• Increased levels of blood sugar, serum creatinine, myoglobin or lactate dehydrogenase (LDH), prolonged blood coagulation time, or electrolyte imbalances in blood tests,
• Itching of the eyes.

Rare adverse effects (may affect up to 1 in 1,000 patients)

• Yellowing of the skin and eyes (jaundice),
• Increased prothrombin time.

Frequency not known (cannot be estimated from available data)

Antibiotic-associated colitis, including pseudomembranous colitis (severe or persistent diarrhoea containing blood and/or mucus, associated with abdominal pain or fever), bruising more easily, bleeding gums or nosebleeds.

Reporting of adverse effects

If you experience any adverse effect, talk to your doctor, pharmacist or nurse, even if it is a possible adverse effect not listed in this leaflet. You can also report them directly through the national reporting system listed in Appendix V. By reporting adverse effects, you can help provide more information on the safety of this medicine.

5. Storage of Cubicin

• Keep this medicine out of the sight and reach of children.
• Do not use this medicine after the expiry date which is stated on the carton after CAD and on the label after EXP. The expiry date refers to the last day of the month indicated.
• Store in a refrigerator (between 2 °C and 8 °C).

6. Package contents and other information

Composition of Cubicin

• The active substance is daptomycin. One vial of powder contains 350 mg of daptomycin.
• The other component is sodium hydroxide.

Appearance of the product and contents of the pack

Cubicin powder for solution for injection and for infusion is presented in a glass vial as a pale yellow to light brown powder or cake. It is reconstituted with a solvent to form a solution prior to administration.

Cubicin is available in packs containing 1 vial or 5 vials.

Marketing Authorization Holder

Merck Sharp & Dohme B.V., Waarderweg 39, 2031 BN Haarlem, The Netherlands

Manufacturer

FAREVA Mirabel, Route de Marsat, Riom, 63963, Clermont-Ferrand Cedex 9, France

For more information about this medicinal product, please contact the local representative of the Marketing Authorization Holder:

Date of the most recent review of this summary:< {MM/YYYY}><{month YYYY}>.

Detailed information on this medicine is available on the website of the European Medicines Agency: https://www.ema.europa.eu

This information is intended for healthcare professionals only:

Important: Please consult the Package Leaflet or Summary of Product Characteristics before prescribing.

Instructions for use and handling

350 mg presentation:

In adults, daptomycin may be administered intravenously as a 30-minute infusion or as a 2-minute injection. Unlike adults, daptomycin must not be administered as a 2-minute injection in paediatric patients. Paediatric patients aged 7 to 17 years should receive daptomycin via a 30-minute infusion. Paediatric patients under 7 years of age receiving doses of 9–12 mg/kg should be administered daptomycin via a 60-minute infusion. Preparation of the infusion solution requires an additional dilution step, as described below.

Cubicin administered as intravenous infusion over 30 or 60 minutes

Reconstituting the lyophilised product with 7 ml of a 9 mg/ml sodium chloride (0.9%) injectable solution yields a concentration of 50 mg/ml of Cubicin for infusion.

The lyophilised product takes approximately 15 minutes to dissolve. The fully reconstituted product is clear and may contain some small bubbles or foam around the edge of the vial.

To prepare Cubicin for intravenous infusion, follow the instructions below:

An aseptic technique must be used throughout the reconstitution and dilution process.

For reconstitution:

1. Remove the polipropylene "flip-off" cap to expose the central portion of the rubber stopper. Clean the top of the rubber stopper with an alcohol swab or other antiseptic solution and allow to dry. After cleaning, do not touch the rubber stopper or allow it to contact any other surface. Draw 7 ml of a 9 mg/ml sodium chloride (0.9%) injectable solution into a syringe using a sterile transfer needle of gauge 21 or smaller, or a needle-free device, and slowly inject through the centre of the rubber stopper into the vial, directing the needle toward the vial wall.
2. Gently rotate the vial to ensure complete wetting of the product, then allow it to stand for 10 minutes.
3. Finally, gently rotate or swirl the vial for a few minutes until a clear reconstituted solution is obtained. Avoid vigorous shaking to prevent foaming.
4. Carefully inspect the reconstituted solution before use to ensure the substance is fully dissolved and to verify the absence of particulate matter. The colour of the reconstituted Cubicin solution may range from pale yellow to light brown.
5. The reconstituted solution must then be diluted with 9 mg/ml sodium chloride (0.9%) (typical volume of 50 ml).

For dilution:

1. Slowly withdraw the appropriate volume of reconstituted solution (50 mg daptomycin/ml) from the vial using a new sterile needle of gauge 21 or smaller, by inverting the vial so that the solution flows toward the stopper. Using a syringe, insert the needle into the inverted vial. While keeping the vial inverted, place the needle tip at the lowest point of the liquid as the solution is drawn into the syringe. Before removing the needle from the vial, pull the plunger back to the end of the syringe barrel to withdraw the required solution from the inverted vial.
2. Expel air, large bubbles, and any excess solution to obtain the required dose.
3. Transfer the required reconstituted dose to 50 ml of 9 mg/ml sodium chloride (0.9%).
4. The reconstituted and diluted solution must be administered intravenously over 30 or 60 minutes.

Cubicin is neither physically nor chemically compatible with glucose-containing solutions. The following drugs have been shown to be compatible when added to infusion solutions containing Cubicin: aztreonam, ceftazidime, ceftriaxone, gentamicin, fluconazole, levofloxacin, dopamine, heparin, and lidocaine.

The total storage time (reconstituted solution in vial and diluted solution in infusion bags) at 25°C must not exceed 12 hours (24 hours if refrigerated).

The stability of the diluted solution in infusion bags has been established for 12 hours at 25°C or 24 hours if refrigerated at 2°C – 8°C.

Cubicin administered as intravenous injection over 2 minutes (for adult patients only)

Water must not be used for reconstitution of Cubicin for intravenous injection. Cubicin must be reconstituted exclusively with 9 mg/ml sodium chloride (0.9%).

Reconstituting the lyophilised product with 7 ml of a 9 mg/ml sodium chloride (0.9%) injectable solution yields a concentration of 50 mg/ml of Cubicin for injection.

The lyophilised product takes approximately 15 minutes to dissolve. The fully reconstituted product is clear and may contain some small bubbles or foam around the edge of the vial.

To prepare Cubicin for intravenous injection, follow the instructions below:

An aseptic technique must be used throughout the reconstitution process.

1. Remove the polipropylene "flip-off" cap to expose the central portion of the rubber stopper. Clean the top of the rubber stopper with an alcohol swab or other antiseptic solution and allow to dry. After cleaning, do not touch the rubber stopper or allow it to contact any other surface. Draw 7 ml of a 9 mg/ml sodium chloride (0.9%) injectable solution into a syringe using a sterile transfer needle of gauge 21 or smaller, or a needle-free device, and slowly inject through the centre of the rubber stopper into the vial, directing the needle toward the vial wall.
2. Gently rotate the vial to ensure complete wetting of the product, then allow it to stand for 10 minutes.
3. Finally, gently rotate or swirl the vial for a few minutes until a clear reconstituted solution is obtained. Avoid vigorous shaking to prevent foaming.
4. Carefully inspect the reconstituted solution before use to ensure the substance is fully dissolved and to verify the absence of particulate matter. The colour of the reconstituted Cubicin solution may range from pale yellow to light brown.
5. Slowly withdraw the reconstituted liquid (50 mg daptomycin/ml) from the vial using a sterile needle of gauge 21 or smaller.
6. Invert the vial so that the solution flows toward the stopper. Using a new syringe, insert the needle into the inverted vial. While keeping the vial inverted, place the needle tip at the lowest point of the liquid as the solution is drawn into the syringe. Before removing the needle from the vial, pull the plunger back to the end of the syringe barrel to withdraw all the solution from the inverted vial.
7. Replace the needle with a new one for intravenous injection.
8. Expel air, large bubbles, and any excess solution to obtain the required dose.
9. The reconstituted solution must be administered slowly by intravenous injection over 2 minutes.

Physical and chemical stability of the reconstituted solution in the vial has been demonstrated for 12 hours at 25°C and up to a maximum of 48 hours if refrigerated (2°C – 8°C).

However, from a microbiological standpoint, the product should be used immediately. If not used immediately, the in-use storage time is the responsibility of the user and normally should not exceed 24 hours at 2°C – 8°C, unless reconstitution/dissolution has taken place under controlled and validated aseptic conditions.

This medicine must not be mixed with any other medicines except those mentioned above.

Cubicin vials are for single use only. Any unused portion remaining in the vial must be discarded.