Bimzelx 320 mg solution for injection in pre-filled pen

Spain
Brand name Bimzelx 320 mg solution for injection in pre-filled pen
Form solution for injection in pre-filled pen
Active substance / Dosage
BIMEKIZUMAB · 320 mg
Prescription type Hospital Diagnosis
Registration number 1211575011
Manufacturer Ucb Pharma
Bimzelx 320 mg solution for injection in pre-filled pen solution for injection in pre-filled pen

Package leaflet: Information for the user

Introduction

Package leaflet: information for the user

Bimzelx 320 mg solution for injection in a pre-filled pen

bimekizumab

This medicinal product is subject to additional monitoring, which will allow for faster identification of new safety information. You can help by reporting any side effects you may experience. Information on how to report side effects is provided at the end of section 4.

Read all of this leaflet carefully before you start using this medicine, as it contains important information for you.

  • Keep this leaflet, as you may need to read it again.
  • If you have any questions, ask your doctor, pharmacist, or nurse.
  • This medicine has been prescribed for you only, and must not be given to other people, even if they have the same symptoms as you, as it may harm them.
  • If you experience any side effects, talk to your doctor, pharmacist, or nurse, even if they are side effects not listed in this leaflet. See section 4.

Contents of the leaflet

  1. What Bimzelx is and what it is used for
  2. What you need to know before using Bimzelx
  3. How to use Bimzelx
  4. Possible side effects
  5. How to store Bimzelx
  6. Contents of the pack and other information

Instructions for use

1. What Bimzelx is and what it is used for

What Bimzelx is

Bimzelx contains the active substance bimekizumab.

What Bimzelx is used for

Bimzelx is used to treat the following inflammatory diseases:

  • Plaque psoriasis
  • Psoriatic arthritis
  • Axial spondyloarthritis, including non-radiographic axial spondyloarthritis and ankylosing spondylitis (radiographic axial spondyloarthritis)
  • Hidradenitis suppurativa

Plaque psoriasis

Bimzelx is used in adults to treat a skin disorder called plaque psoriasis. Bimzelx reduces symptoms, including pain, itching, and skin scaling.

Psoriatic arthritis

Bimzelx is used to treat adults with psoriatic arthritis. Psoriatic arthritis is a disease that causes joint inflammation, often accompanied by plaque psoriasis. If you have active psoriatic arthritis, you may have first been given other medications. If these medications are not effective enough or if you are intolerant to them, you will be given Bimzelx either alone or in combination with another medicine called methotrexate.

Bimzelx reduces inflammation and therefore may help reduce joint pain, stiffness, swelling in and around the joints, psoriatic skin rash, and psoriatic nail damage, as well as slow down cartilage and bone damage in the joints affected by the disease. These effects help you control the signs and symptoms of the disease, make your normal daily activities easier, reduce fatigue, and improve your quality of life.

Axial spondyloarthritis, including non-radiographic axial spondyloarthritis and ankylosing spondylitis (radiographic axial spondyloarthritis)

Bimzelx is used to treat adults with an inflammatory disease that primarily affects the spine and causes inflammation of the spinal joints, called axial spondyloarthritis. If the condition is not visible on X-rays, it is called “non-radiographic axial spondyloarthritis”; if it occurs in patients with visible signs on X-rays, it is called “ankylosing spondylitis” or “radiographic axial spondyloarthritis”.

If you have axial spondyloarthritis, you will first be given other medications. If you do not respond sufficiently to these medications, Bimzelx will be administered to reduce the signs and symptoms of the disease, decrease inflammation, and improve your physical functional capacity. Bimzelx may help reduce back pain, stiffness, and fatigue, which may make your normal daily activities easier and improve your quality of life.

Hidradenitis suppurativa

Bimzelx is used in adults to treat a disease called hidradenitis suppurativa (sometimes referred to as acne inversa or Verneuil’s disease). Hidradenitis suppurativa is a chronic inflammatory skin disease that causes painful lesions in the form of sensitive nodules (lumps) and abscesses (boils), as well as lesions that may discharge pus. It mainly affects specific areas of the skin, such as under the breasts, armpits, inner thighs, groin, and buttocks. Scarring may also develop in the affected areas. You will first be given other medications. If your response to these medications is not sufficient, you will be given Bimzelx.

Bimzelx reduces inflammatory nodules (lumps), abscesses (boils), and lesions that may discharge pus, as well as the pain caused by hidradenitis suppurativa.

How Bimzelx works

Bimekizumab, the active substance in Bimzelx, belongs to a group of medicines called interleukin (IL) inhibitors. Bimekizumab works by reducing the activity of two interleukins called IL-17A and IL-17F, which are involved in driving inflammation. Levels of these interleukins are elevated in inflammatory diseases such as psoriasis, psoriatic arthritis, axial spondyloarthritis, and hidradenitis suppurativa.

2. What you need to know before using Bimzelx

Do not use Bimzelx

  • If you are allergic to bimekizumab or to any of the other ingredients of this medicine (listed in section 6).
  • If you have an infection that your doctor considers significant, for example, tuberculosis (TB).

Warnings and precautions

Talk to your doctor, pharmacist, or nurse before starting to use Bimzelx if:

  • You have an infection or an infection that keeps recurring.
  • You have recently been vaccinated or are planning to get vaccinated. During treatment with Bimzelx, certain vaccines (those made with live microorganisms) should not be given.
  • You have ever had tuberculosis (TB).
  • You have ever had inflammatory bowel disease (Crohn's disease or ulcerative colitis).

Inflammatory bowel disease (Crohn's disease or ulcerative colitis)

Stop using Bimzelx and inform your doctor or seek immediate medical help if you notice blood in your stools, abdominal cramps, pain, diarrhoea, or weight loss. These may be signs of new or worsening inflammatory bowel disease (Crohn's disease or ulcerative colitis).

Be alert for signs of infections and allergic reactions

Rarely, Bimzelx may cause serious infections. Speak to your doctor or seek immediate medical help if you notice any signs of a serious infection. These signs are listed under "Serious adverse reactions" in section 4.

Bimzelx may cause serious allergic reactions. Speak to your doctor or seek immediate medical help if you notice any signs of a serious allergic reaction. These signs may include:

  • Difficulty breathing or swallowing.
  • Low blood pressure, which may cause dizziness or lightheadedness.
  • Swelling of the face, lips, tongue, or throat.
  • Severe itching of the skin, with a red rash or lumps.

Children and adolescents

This medicine must not be given to children and adolescents under 18 years of age, as it has not been studied in this age group.

Other medicines and Bimzelx

Tell your doctor or pharmacist if you are taking, have recently taken, or might need to take any other medicines.

Pregnancy, breastfeeding, and fertility

If you are pregnant, think you may be pregnant, or are planning to become pregnant, consult your doctor before using this medicine. It is preferable to avoid using Bimzelx during pregnancy, as it is unknown how this medicine may affect the baby.

If you are a woman who can become pregnant, you must use contraception while using this medicine and for at least 17 weeks after the last dose of Bimzelx.

If you are breastfeeding or planning to breastfeed, consult your doctor before using this medicine. You and your doctor should decide whether you can breastfeed or use Bimzelx.

Driving and using machines

It is unlikely that Bimzelx will affect your ability to drive or use machines.

Bimzelx contains polysorbate 80

This medicine contains 0.4 mg of polysorbate 80 in each ml of solution. Polysorbates may cause allergic reactions. Inform your doctor if you have any known allergies.

Bimzelx contains sodium

This medicine contains less than 1 mmol (23 mg) of sodium per dose; this is essentially "sodium-free".

3. How to use Bimzelx

Follow exactly the administration instructions for this medicine given by your doctor or pharmacist. If in doubt, consult your doctor or pharmacist again.

How much Bimzelx is administered and for how long

Plaque psoriasis

The recommended dose, administered as an injection under the skin ("subcutaneous injection"), is as follows:

  • 320 mg (administered in one pre-filled pen containing 320 mg) at weeks 0, 4, 8, 12, and 16.
  • From week 16 onwards, you will use 320 mg (one pre-filled pen containing 320 mg) every 8 weeks. If you weigh more than 120 kg, your doctor may decide to continue with injections every 4 weeks from week 16.

Psoriatic arthritis

The recommended dose, administered as a subcutaneous injection, is as follows:

  • 160 mg every 4 weeks.
  • If you have psoriatic arthritis coexisting with moderate to severe plaque psoriasis, the recommended dosing regimen is the same as for plaque psoriasis. After week 16, your doctor may adjust the injections to 160 mg every 4 weeks, depending on your joint symptoms. Other pharmaceutical forms/concentrations are available for administering the 160 mg dose.

Axial spondyloarthritis, including non-radiographic axial spondyloarthritis and ankylosing spondylitis (radiographic axial spondyloarthritis)

The recommended dose, administered as a subcutaneous injection, is as follows:

  • 160 mg every 4 weeks. Other pharmaceutical forms/concentrations are available for administering the 160 mg dose.

Hidradenitis suppurativa

The recommended dose, administered as a subcutaneous injection, is as follows:

  • 320 mg (administered in one pre-filled pen containing 320 mg) every 2 weeks until week 16.
  • From week 16 onwards, you will receive 320 mg (one pre-filled pen containing 320 mg each) every 4 weeks.

You and your doctor or nurse will decide whether you should inject this medicine yourself. Do not self-inject this medicine unless a healthcare professional has trained you to do so. A caregiver may also administer the injections if they have been properly trained.

Read the "Instructions for use" at the end of this leaflet before self-injecting the Bimzelx 320 mg solution pre-filled pen.

If you use more Bimzelx than you should

Inform your doctor if you have used more Bimzelx than you should or if you injected the dose earlier than scheduled.

If you forget to use Bimzelx

Speak with your doctor if you have forgotten to inject a dose of Bimzelx.

If you stop using Bimzelx

Talk to your doctor before stopping treatment with Bimzelx. If you stop treatment, symptoms may return.

If you have any further questions about the use of this medicine, ask your doctor, pharmacist, or nurse.

4. Possible adverse effects

Like all medicines, this medicine can cause adverse effects, although not everyone will experience them.

Serious adverse effects

Inform your doctor or seek medical assistance immediately if you experience any of the following adverse effects:

Possible serious infection – signs may include:

  • fever, flu-like symptoms, night sweats
  • feeling tired or short of breath, persistent cough
  • warmth, redness, and pain in the skin or a painful blistering rash

Your doctor will decide whether you can continue using Bimzelx.

Other adverse effects

Inform your doctor, pharmacist, or nurse if you experience any of the following adverse effects:

Very common (may affect more than 1 in 10 people)

  • upper respiratory tract infections with symptoms such as sore throat and nasal congestion

Common (may affect up to 1 in 10 people)

  • oral or throat candidiasis with symptoms such as yellow or white patches; redness or sores in the mouth and pain when swallowing
  • fungal skin infections, such as athlete's foot between the toes
  • ear infections
  • cold sores (herpes simplex infections)
  • stomach flu (gastroenteritis)
  • inflammation of hair follicles, which may look like pimples
  • headache
  • itching, dry skin, or a rash resembling eczema, sometimes with swollen and red skin (dermatitis)
  • acne
  • redness, pain, swelling, and bruising at the injection site
  • feeling tired
  • fungal infection in the vulvovaginal area (vaginal candidiasis)

Uncommon (may affect up to 1 in 100 people)

  • low levels of white blood cells (neutropenia)
  • fungal infections of the skin and mucous membranes (including esophageal candidiasis)
  • eye discharge with itching, redness, and swelling (conjunctivitis)
  • blood in stools, cramps and abdominal pain, diarrhea, or weight loss (signs of intestinal problems)

Reporting of adverse effects

If you experience any adverse effect, consult your doctor, pharmacist, or nurse, even if it is a possible adverse effect not listed in this leaflet. You may also report them directly through the national reporting system listed in Appendix V. By reporting adverse effects, you can help provide more information on the safety of this medicine.

5. Storage of Bimzelx

Keep this medicine out of the sight and reach of children.

Do not use this medicine after the expiry date stated on the label and on the carton after EXP/CAD. The expiry date refers to the last day of the month indicated.

Store in a refrigerator between 2 °C and 8 °C. Do not freeze.

Keep the pre-filled pens in their original carton to protect them from light.

Bimzelx may be kept outside the refrigerator for up to 25 days. It must be kept in the outer packaging, at a temperature not exceeding 25 °C, and protected from direct light. Do not use the pre-filled pens after this period. There is a space on the carton where you can write the date you removed it from the refrigerator.

Medicines should not be disposed of via wastewater or household waste. Ask your pharmacist how to dispose of medicines and packaging you no longer need. This will help protect the environment.

6. Contents of the pack and other information

Composition of Bimzelx

  • The active substance is bimekizumab. Each pre-filled pen contains 320 mg of bimekizumab in 2 ml of solution.
  • The other components are glycine, sodium acetate trihydrate, glacial acetic acid, polysorbate 80, and water for injections.

Appearance of Bimzelx and contents of the pack

Bimzelx is a liquid, from transparent to slightly opalescent. The colour may vary from colourless to light brownish-yellow. It is supplied in a single-use, disposable pre-filled pen.

Bimzelx 320 mg solution for injection in a pre-filled pen is available in packs containing 1 pre-filled pen and in multiple packs of 3 boxes, each containing 1 pre-filled pen.

Only some pack sizes may be marketed.

Marketing Authorisation Holder

UCB Pharma S.A.

Allée de la Recherche 60

B-1070 Brussels, Belgium

Manufacturer

UCB Pharma S.A.

Chemin du Foriest

B-1420 Braine-l’Alleud, Belgium

For more information about this medicine, please contact the local representative of the Marketing Authorisation Holder:

Belgium/Belgium/Belgium

UCB Pharma S.A./NV

Tel/Tel: + 32 / (0)2 559 92 00

Lithuania

UCB Pharma Oy Finland

Tel: + 358 9 2514 4221 (Finland)

Bulgaria

UCB Bulgaria Ltd.

Tel.: + 359 (0) 2 962 30 49

Luxembourg/Luxembourg

UCB Pharma S.A./NV

Tél/Tel: + 32 / (0)2 559 92 00 (Belgium/Belgium)

Czech Republic

UCB s.r.o.

Tel: + 420 221 773 411

Hungary

UCB Magyarország Kft.

Tel.: + 36-(1) 391 0060

Denmark

UCB Nordic A/S

Tlf.: + 45 / 32 46 24 00

Malta

Pharmasud Ltd.

Tel: + 356 / 21 37 64 36

Germany

UCB Pharma GmbH

Tel: + 49 /(0) 2173 48 4848

Netherlands

UCB Pharma B.V.

Tel: + 31 / (0)76-573 11 40

Estonia

UCB Pharma Oy Finland

Tel: + 358 9 2514 4221 (Finland)

Norway

UCB Nordic A/S

Tlf: + 47 / 67 16 5880

Greece

UCB Α.Ε.

Tel: + 30 / 2109974000

Austria

UCB Pharma GmbH

Tel: + 43-(0)1 291 80 00

Spain

UCB Pharma, S.A.

Tel: + 34 / 91 570 34 44

Poland

UCB Pharma Sp. z o.o./VEDIM Sp. z o.o.

Tel.: + 48 22 696 99 20

France

UCB Pharma S.A.

Tél: + 33 / (0)1 47 29 44 35

Portugal

UCB Pharma (Pharmaceutical Products), Lda

Tel: + 351 21 302 5300

Croatia

Medis Adria d.o.o.

Tel: +385 (0) 1 230 34 46

Ireland

UCB (Pharma) Ireland Ltd.

Tel: + 353 / (0)1-46 37 395

Romania

UCB Pharma Romania S.R.L.

Tel: + 40 21 300 29 04

Slovenia

Medis, d.o.o.

Tel: + 386 1 589 69 00

Iceland

Vistor hf.

Tel: + 354 535 7000

Slovakia

UCB s.r.o., organizational unit

Tel: + 421 (0) 2 5920 2020

Italy

UCB Pharma S.p.A.

Tel: + 39 / 02 300 791

Finland/Finland

UCB Pharma Oy Finland

Tel/Puh: + 358 9 2514 4221

Cyprus

Lifepharma (Z.A.M.) Ltd

Tel: + 357 22 056300

Sweden

UCB Nordic A/S

Tel: + 46 / (0) 40 294 900

Latvia

UCB Pharma Oy Finland

Tel: + 358 9 2514 4221 (Finland)

Date of the most recent review of this leaflet:

Other sources of information

Detailed information on this medicine is available on the European Medicines Agency website: https://www.ema.europa.eu

Instructions for use

Read the following instructions completely before using the Bimzelx 320 mg pre-filled pen.

Bimzelx 320 mg pre-filled pen at a glance (see Figure A):

Diagram of a medical device with cap, viewing window, and protection of

Important information:

  • Your healthcare professional must show you how to prepare and inject Bimzelx using the 320 mg pre-filled pen. Do not inject yourself or another person until you have been trained to inject Bimzelx correctly.
  • You and/or your caregiver must read these instructions before each use of Bimzelx.
  • Contact your healthcare professional if you or your caregiver have any questions about how to correctly inject Bimzelx.
  • Each pre-filled pen is for single use (single dose) only.

Do not use this medicine and return it to the pharmacy if:

  • The expiry date (EXP/CAD) has passed.
  • The packaging seal is broken.
  • The pre-filled pen has been dropped or appears damaged.
  • The liquid has ever been frozen (even if it has since been thawed).

For a more comfortable injection: Remove the 320 mg pre-filled pen from the refrigerator and leave it on a flat surface at room temperature in its original packaging for 30–45 minutes before injection.

  • Do not warm it in any other way, such as in a microwave or with hot water.
  • Do not shake the pre-filled pen.
  • Do not remove the pen cap until you are ready for injection.

Follow the steps below each time you use Bimzelx.

Step 1: Prepare for injection

Place the following items on a clean, flat, well-lit surface, such as a table:

  • 1 Bimzelx 320 mg pre-filled pen

You will also need (not included in the pack):

  • 1 alcohol swab
  • 1 clean cotton ball
  • 1 sharps disposal container. See “Disposal of used Bimzelx pre-filled pen” at the end of these instructions.

Step 2: Choose the injection site and prepare for injection

2a: Choose the injection site

  • Possible injection sites are:
    • The stomach (abdomen) or the thigh (see Figure B);
    • The back of the upper arm may also be used if a caregiver is administering the injection (see Figure C).
Schematic diagrams of a human body indicating injection sites: abdomen or muscle and back of the arm with highlighted gray areas
  • Do not inject into areas where the skin is tender, bruised, red, scaly, or hard, or into areas with scars or stretch marks.
  • Do not inject within 5 cm of the navel.
  • You must select a different injection site each time you administer an injection.

2b: Wash your hands thoroughly with soap and water and dry them with a clean, dry towel

2c: Prepare the skin

  • Clean the injection site with an alcohol swab. Allow the area to dry completely. Do not touch the cleaned area before injection.

2d: Check the pre-filled pen (see Figure D)

  • Make sure the name Bimzelx and the expiry date are visible on the label.
  • Check the medicine through the viewing window. The medicine should be clear to slightly opalescent and free from particles. The colour may vary from colourless to light yellowish brown. Air bubbles in the liquid may be visible. This is normal.
  • Do not use the Bimzelx pre-filled pen if the medicine appears cloudy, has changed colour, or contains particles.
Diagram of a medical device with central viewing window and expiration date indicated on the right side

Black text on white background displaying the Spanish text 'Fecha de caducidad'Black text on white background with the Spanish text 'Ventana de visualización'

Step 3: Inject Bimzelx

3a: Remove the pen cap

  • Hold the pre-filled pen firmly by the grip with one hand. Pull the pen cap straight off with the other hand (see Figure E). Although you cannot see the needle tip, it is now exposed.
  • Do not touch the needle shield or reattach the cap, as this may activate the pen and result in accidental needle stick.
Two hands holding a rectangular medical device while a dashed arrow indicates a movement to the left for

3b: Hold the pre-filled pen at a 90-degree angle to the cleaned injection site (see Figure F)

A hand holds a medical device vertically at 90 degrees to the underlying flat surface for The number 90 followed by the degree symbol on a white background indicating an angle of ninety degrees

3c: Place the pre-filled pen flat against the skin and then press the pre-filled pen firmly against the skin

You will hear a click. The injection starts when you hear the first “click” (see Figure G).

Do not lift the pre-filled pen away from the skin.

Illustration of a hand holding an injection pen placed against the skin with a downward arrow and the word 'Clic' Black text with the words 'Clic' on a uniform white background

3d: Hold the pre-filled pen in place and continue to press it firmly against the skin. It will take approximately 20 seconds to receive the full dose.

  • You will hear a second “click” indicating that the injection is almost complete. You will see the yellow indicator fill the viewing window (see Figure H).
A hand holds a pen-shaped medical device pressing it against a surface with the word 'Clic' indicating the Black text on white background displaying the words 'Clic' in sans-serif font
  • After the second click, continue pressing the pre-filled pen for another 5 seconds (count slowly to 5). This ensures you receive the full dose (see Figure I).
The A hand holds a white medical device with a 5-second indicator and yellow liquid inside

3e: Remove the pre-filled pen by carefully pulling it away from the skin. The needle shield will automatically cover the needle

  • Press a dry cotton ball against the injection site for a few seconds. Do not rub the injection site. Mild bleeding or a small drop of liquid may occur. This is normal. You may cover the injection site with a plaster if needed.

Step 4: Dispose of the used Bimzelx pre-filled pen

Immediately after use, place the used pre-filled pen into a sharps disposal container (see Figure J).

A hand holds a white medical device with a yellow window and brings it close to a flat white surface against a neutral background